!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.
The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:
Rule 1- All posts must be legitimate questions. All post titles must include a question.
All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.
Rule 2- Your question subject cannot be illegal or NSFW material.
Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.
Rule 3- Do not seek mental, medical and professional help here.
Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.
Rule 4- No self promotion or upvote-farming of any kind.
That's it.
Rule 5- No baiting or sealioning or promoting an agenda.
Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.
Rule 6- Regarding META posts and joke questions.
Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.
On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.
If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.
Rule 7- You can't intentionally annoy, mock, or harass other members.
If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.
Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.
Rule 8- All comments should try to stay relevant to their parent content.
Rule 9- Reposts from other platforms are not allowed.
Let everyone have their own content.
Rule 10- Majority of bots aren't allowed to participate here.
Our breathtaking icon was bestowed upon us by @Cevilia!
The greatest banner of all time: by @TheOneWithTheHair!
Edit: I decided to throw it out and order a new stainless steel one that's all one piece. Thanks for the help!
Round up another $1.25 and head to dollar tree
This right here unfortunately, the glue will cost more if you only use the glue once. We live in a world where items are easier/cheaper to throw out then repair.
Though I guess the cheapest thing you could do is drill a hole on the backside with a drill and put a screw through it. Only a short screw that goes into the cylinder/shaft.
Also fyi, most plastics from the dollar store are not guaranteed to be toxic free. You may find most of these plastics melt on pans with use over time and might end up being consumed. Usually what I opt for is metal on a metal pan or silicon cooking utensils that don't seem to melt or loose peices of them in what I am cooking.
Smash a tech screw in it, problem solved till the screw rusts.
I can relate to not wanting to throw something away if you can just fix it, but I guarantee you will save yourself a lot of time and stress if you just go down to your local thrift shop with a kitchen section and pick one of the dozens of spatulas they will have for like $0.50.
The last thing you want is the mess and possible pain of your repaired spatula breaking under the stress of lifting a hot, oily food from the pan.
This. If it's plastic it should be solid plastic. This kind of failure will happen again.
Just get metal with a plastic or wooden handle. I got a $3 one 5 years ago and it works great. Cast iron can handle metal on metal.
It looks like the glue may cost as much as the spatula.
Just go to Spatula City
Plastic items aren't meant to be repaired and it's not a good idea to use them with food for very long. The plastic parts will disintegrate. Just throw it out.
Buy one that's made out of wood.
Metal, wood handle, more durable.
the only allowable plastic for utensils should be a rubber spatula (high heat), for scooping out the last bits of a product.
metal is ok but not so good for the pan. absolutely not suitable for coated pans
....didn't know i had to specify or have a disclaimer.
Thanks for the assist though, in case someone didn't know.
If I really wanted to keep it I wouldn't use glue I'd put part of a balloon or a finger from a glove on the spatula and force it back in. IMO any kitchen utensil that's 2 parts like this will always fail quickly. I believe that's a force fitting with ridges intended to keep it in so slightly enlarging the piece that goes in will recreate the tight fit
I've used tin foil to make the same repair. You can be as sloppy as you like, after it fits snuggly, you can just peel/rub off any excess.
Water proof JB Weld. But honestly it should be tossed. You want a spatula with a full tang. Even after you JB weld this the metal is going to fatigue and it will break again because there is so little connection between the tool and handle.
Yeah, I threw it out. I'm gonna order a full stainless steel one.
I strongly recommend NO glue and liberal use of your TRASH CAN. Then go get a cast iron frying pan and a METAL flip turner.
Do this so you do not die a horrible micro plastic PFOS death one day.
Best!
I already have cast iron pots and pans, but you make a good point. I'm going stainless steel!
Le Crueset makes a fantastic spatula, solid piece of metal, no glues/adhesives holding it together. Comes in either a metal blade or silicone coated one.
Instructions unclear, trash can now wedged into my dishwasher and a pipe burst behind it
At least you didn't do something unspeakable to an innocent ceiling fan.
Get a proper single piece silicone spatula for your non stick and throw this one away. Get a single piece metal spatula for your stainless steel pan.
Alternatively, throw out your non stick pans and skip step one above.
Any glue that is a) food safe and b) able to be stuffed in a dishwasher is probably going to be more expensive than a new spatula.
I applaud the effort to repair, but sometimes, it’s just not viable. Especially because the problem is in the relatively weak design of the part.
ETA: Food grade silicone or epoxy would do the job for a while, but neither will bond very well to the spatula. It would essentially be a mechanical bond and probably weaker than before
The glue would cost the same price as a spatula at a dollar store.
That looks like a friction fit. Put it in place and try and crimp the tubing just a little bit. This is a 'controlled pressing force' type of operation. Don't hammer or push too hard too fast. Creative thinking can go a long way in training your inner MacGyver (ancient US TV show reference).
One idea is to use a dining room chair. The leg of a chair can exert a lot of pressing force on a small area. This can work if you lack hand tools, a vise or other methods. Position the tube and lower your weight onto the chair in a controlled manner to alter the geometry enough to securely hold the insert in place.
Two part epoxy would be the only type. The catalyst in most epoxies is probably toxic, there are specialty food safe types, but they cost a fortune. I don't think this is the solution though. I would go with crimping the tube.
MacGyver (ancient US TV show reference)
I would call a TV show ancient, if it's like 40 years old, but MacGyver is like, 20 years ago?
Wait...
Elmer's? If kids can eat it, so can you!
Hahaha nice
Stick it back in, put it in a clamp, and drill a screw straight into the end of that rod. Ain't going nowhere unless you break it in the process, but at least you'll have had some fun. No, I'm not being serious.
God this gives me PTSD of the similar spatulas my grandparents insist on getting for some reason XD a big reason I don't skimp on quality kitchen supplies now. I recommend, if it's available, anyone who wants good kitchen stuff that won't break easy, try finding an Asian market of some kind with an appliance etc. section. The Korean market near me sells all type of great wooden spatulas, tongs, etc. and also stainless steel, for a great price. Way better than the overpriced trash at the big box stores.
Cyanoacrylate. Unless you're literally soaking it in your food I'm not too concerned about food safety with where the joint is - but of course I've been exposed to so many carcinogens that a little super glue won't matter
Just get a Spurtle.
If its good enough to glue my fingers it will glue anything.
Seriously though we use this to glue orings together and then install them in hot working machinery.
Probably more expensive then a new spatula though
Stainless steel screw through the part where plastic and metal pipe meet. Or epoxy.
Assuming it's a press-fit...
I would do what another user suggested and use a bit of food grade silicone. Put it around the insert part and push on the handle. Then, take a flathead screwdriver and a hammer to put a little indent where that well is on the top of the spatula part, just under the edge of the metal.
Cut out a strip of tinfoil to wrap once or twice around the lower connector, then jam it back on.
In my experience the only thing I think it will endure the dishwasher is the 2 part epoxi but that's toxic. I did use in my cup handle but I don't drink out of it. If its going to touch food I don't think you have a safe glue.
Edit: if there is plastic inside the metal you can try melting and bonding both. If its metal on plastic then forget it
They have food safe epoxies. But yes, a 2-part epoxy wood be what I go for as well.
I didn't know that! great to know of I ever need ir