NonCredibleDefense
A community for your defence shitposting needs
Rules
1. Be nice
Do not make personal attacks against each other, call for violence against anyone, or intentionally antagonize people in the comment sections.
2. Explain incorrect defense articles and takes
If you want to post a non-credible take, it must be from a "credible" source (news article, politician, or military leader) and must have a comment laying out exactly why it's non-credible. Low-hanging fruit such as random Twitter and YouTube comments belong in the Matrix chat.
3. Content must be relevant
Posts must be about military hardware or international security/defense. This is not the page to fawn over Youtube personalities, simp over political leaders, or discuss other areas of international policy.
4. No racism / hatespeech
No slurs. No advocating for the killing of people or insulting them based on physical, religious, or ideological traits.
5. No politics
We don't care if you're Republican, Democrat, Socialist, Stalinist, Baathist, or some other hot mess. Leave it at the door. This applies to comments as well.
6. No seriousposting
We don't want your uncut war footage, fundraisers, credible news articles, or other such things. The world is already serious enough as it is.
7. No classified material
Classified ‘western’ information is off limits regardless of how "open source" and "easy to find" it is.
8. Source artwork
If you use somebody's art in your post or as your post, the OP must provide a direct link to the art's source in the comment section, or a good reason why this was not possible (such as the artist deleting their account). The source should be a place that the artist themselves uploaded the art. A booru is not a source. A watermark is not a source.
9. No low-effort posts
No egregiously low effort posts. E.g. screenshots, recent reposts, simple reaction & template memes, and images with the punchline in the title. Put these in weekly Matrix chat instead.
10. Don't get us banned
No brigading or harassing other communities. Do not post memes with a "haha people that I hate died… haha" punchline or violating the sh.itjust.works rules (below). This includes content illegal in Canada.
11. No misinformation
NCD exists to make fun of misinformation, not to spread it. Make outlandish claims, but if your take doesn’t show signs of satire or exaggeration it will be removed. Misleading content may result in a ban. Regardless of source, don’t post obvious propaganda or fake news. Double-check facts and don't be an idiot.
Join our Matrix chatroom
Other communities you may be interested in
- !militaryporn@lemmy.world
- !forgottenweapons@lemmy.world
- !combatvideos@sh.itjust.works
- !militarymoe@ani.social
Banner made by u/Fertility18
view the rest of the comments
I've never shot paper targets, but might this be at extreme range? I mean, those don't look like circular holes, so I'd assume that the bullet is tumbling for some reason.
kagis
Sounds like the term is "keyholing".
https://www.snipershide.com/shooting/threads/308-tumbling-at-almost-a-mile.194313/
https://old.reddit.com/r/guns/comments/el6h5q/holy_keyhole_batman/
That keyholing image looks a lot like the image of the target that OP posted.
It is keyholing. It happens when as you can see the bullet loses stability and tumbles in the air before hitting the paper sideways. It can be caused by many things. Insufficient rifling twist for the length of the bullet being used is one of them. The bullet hitting the ground or something else before hitting the target is another possibility.
Either way, it isn't a desirable thing and indicates that something is wrong. The fact that the PLA members are proudly posting pictures of a bunch of keyholes randomly splattered all over a target like that suggests that they think this is normal and that therefore they don't know what they're doing.
The term "keyholing" is also sometimes erroneously used to refer to when two bullet holes are touching on paper.
Could keyholing of ... seemingly this magnitude... be the result of basically laughably bad tolerances in internal barrel width, or perhaps the barrels are made of some kind of alloy that expands significantly from heat?
I have only ever seen keyholing in western gun videos from basically burn downs... but even then after a barrel is nearing its end of life by manufacturer specs, its more common to get some kind of failure to feed, significantly decreased precision and only occasional keyholes.
Maybe another possibility is similarly poor quality alloy of some kind used in the cartridge itself?
Combination of all of these things?
I remember seeing a fairly recent video of some kind of PLA MOUT type urban course... and you could see massive keyholing on targets that were like 5 to 10 meters away.
The prevalence of it baffles me. Ive personally dealt with and seen misfires and jams of various kinds at ranges, but I've never even seen a keyhole occur in real life.
I've seen a .22LR of mine keyhole. Once. Or twice. Ever. I honestly thought this was an AI imagine making fun of the PLA.
I saw it at the range a few times. Worst was when someone had their scope set way too low, and it was causing them to hit the concrete roof. Let off three shots, wasn't even on paper, and then the next one keyholed. Hold up here, let's twist this knob and try again.
5.56 (especially M855 for some reason) also exhibits ‘fleet yaw’ for the first couple of yards when fired. Factory new barrels and ammo doesn’t matter, iirc something about the rapid application of rotational force from rifling and projectile construction
Fleet yaw is a different phenomenon that impacts terminal ballistic performance. It's essentially a way of describing why some projectiles tumble and fragment after impact while others will tend to remain more stable and pass straight through for longer.
The projectile AoA being described in that context is only a couple of degrees. It's enough to change how the round behaves after hitting something, but it's not the type of in-flight wild tumbling that results in keyholing on a target.
This is an important clarification, you’re right. The yaw angle is minimal in ballistic flight, the level of keyholeing in the photo is rather dramatic. Though the 5.8x42mm is standard with a mild steel penetrator like M855, and the round was definitely built with cost as a major factor - maybe a bad lot of ammo?
On the heat issue prolonged fire would cause the metal to soften allowing for increased degradation of the rifling.
The easiest ways for it to happen would be either a poorly made barrel or a barrel not designed for a specific projectile. Different barrel twist rates are better for different cartridges. A heavy bullet is better in a faster twisted barrel. If you fired a very heavy bullet in a slow twisted barrel you would likely not have it reach a proper stabilization.
i don't know enough about chinese rifles to speak authoritatively one way or the other, but there was a claim that it's a target from QCB training where they used rubber bullets that tumble no matter what you do
I think 5.45x39mm round they use tumbles a lot which causes this keyholing
The standard "ball" bullet used by the Russian military, at least, in the 5.45x39mm is designed to easily tumble once it is inside the target. It is more of an effect of the bullet's construction and fine tuning of the rifling twist rate than the caliber itself. But it is still supposed to remain stable with the nose pointed forward when traveling to the target. Otherwise it becomes extremely inaccurate and loses its velocity very rapidly, which causes it to fall short.
The QBZ family of rifles, both the older bullpup Type 95 and its variants, and the newer Type 191, fire a 5.8 x 42mm round, not the AK 74 'poison bullet'.
While I am sure the PLA has tons of 47s, and 74s still in active use, their efforts to modernize have included introduction of and seemingly wide issuance of the QBZ 95 family since roughly the early 2000s, and more recently the Type 191.
Usually when they do publicity videos or images, they like to show off the QBZ family.
If I learned anything of authoritarian countries claiming to be communist, they would never manufacture a whole new line of weapons without extensive testing, and if it turned out to be shit, they would totally have the self-reflection not to keep issuing it but to fix it and retry with a new variant. Totally.
I have seen PLA videos of basically an urban combat live fire on static targets.
You get an absurd amount of keyholing at ranges that between 5 to 10 to 20 meters.
Its possible this particular image is from a longer distance static range, but the keyholing problem seems to be quite widespread, irrespective of range.
As has already been said, something is going seriously wrong with either the guns, bullets or both that are being mass produced for around a year now.
That is a photoshopped picture, btw.
I can't imagine that keyholing like that would be even be slightly tolerated and it's not too difficult to get stable flight unless there are serious issues with the firearms.
If a bullet is tumbling out of the barrels, those barrels are seriously fucked. They are shot out, are using bullets that are too small or there are serious defects with the bullets.
A bad twist rate or extremely poor load generally won't cause tumbling until much later. If the bullets start at slightly at supersonic and slow to subsonic quickly, that might do it.
I would like to see those videos of the keyholing you described, which is why my brain seems to have vomited all over this comment. (This has got me super curious, is all.)