I've been looking at getting something new in this range also, and found the Kingroon KLP1, which is a fully enclosed Core XY design.
this post was submitted on 17 Nov 2023
11 points (100.0% liked)
3DPrinting
15592 readers
29 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
That's not a brand I came across in my searches. I'll have to look into it.
CoreXY has advantages over the typical RepRap-style 3-axis movement or bed-slingers. The frame is more rigid, so the print head can move faster while maintaining accuracy. The enclosure also lets you print higher temp materials with less warping.
This would be stretching the budget, but there are a few Voron variants that aren't that much out of your price range. You're going to be giving up print volume though.
Vorons are fully open sourced, very capable, etc. There are a number of vendors who offer both BOM in a box, as well as customized BOMs. There are a ton of officially endorsed user mods and plenty of community mods too.
They are a little overbuilt, but they're very capable. Depending on what you're looking to print material wise, you could shed some cost by not enclosing your printer. Or you could print magnetic panel mounts and pull panels off when needed...
The more mainstream recommendations these days are Enders (fine, cheap, expect to need to tinker), Sovol (new kid on the block), Bambu (look familiar? there's some controversy around their always connected cloud model), and Prusa (reliable, somewhat pricey given their capabilities).
I do really like the Vorons and while I have no problem building one myself, it's a bit much for this go-round. When I replace (or supplement) whatever I buy this time, it'll be on the short list.
I just got a SV06+ about a month ago (first printer). I have installed Klipper and a few other mods and am having a blast. I used a Raspberry Pi and an old 8 inch Samsung Tab A for a screen to interact with Klipper even though Sovol does sell a Klipper screen for the SV06+ that you can install after the fact. I got it for about $360 on Amazon.
~~Prusa XL, 5 tool version~~
Oops I thought you wrote sub $5000.
I recommend the Bambu Lab A1 Mini. With or without the AMS. It’s a great size to get back into printing. I have the Prusa Mini and 180mm^3 is really all I need for most of my prints.
Have you considered a Prusa Mini? Unless you need a larger print bed, it's a great starter printer at that price point.
I have looked at that one. I'm not a big fan of the gantry and would like at least 200x200.
The Prusa mini gantry is solid. I have been printing on one for 2+ years and will vouch 100% that it’s extremely well built. The 20mm you’re missing is seriously not the issue you think it is. It is rare that I ever go to one of my larger printers with the Mini being such a reliable workhorse. (workpony?)