OZFive

joined 1 year ago
 

It's not wrong.

[–] OZFive@lemmy.world 30 points 3 weeks ago (7 children)

Ghosts pass through solid wall/door. Celebrate finding a key. Unfortunately they cannot remove it from the room as it is solid and cannot pass through matter like they can. Ghosts get depressed about this.

[–] OZFive@lemmy.world 4 points 1 month ago (6 children)

You lift them from the bottom and there is a system of gears and springs (citation needed) that assist with them being raised and hold them in place.

Pull them down from the bottom and they come down (with some resistance).

[–] OZFive@lemmy.world 7 points 1 month ago

Astroturfing on Lemmy? We must be getting big!

[–] OZFive@lemmy.world 2 points 1 month ago

Loved these. Thank you so much for reminding me about them!

[–] OZFive@lemmy.world 4 points 1 month ago

I would make a guess and say that if you are looking to get an answer or to do something with Assistant having your notifications read to you first and delaying whatever you wanted to do... might be an unwanted feature.

[–] OZFive@lemmy.world 1 points 1 month ago

Now if we can just have a decent case that is...

  • Not slippery
  • Adds SOME drop protection
  • Has Mag-Safe
  • Has Mag-Safe positioned correctly
  • Stays on without too much adhesive
  • Looks halfway decent /allows the phone's design to be seen

I would be happy.

[–] OZFive@lemmy.world 15 points 2 months ago (1 children)

If they could build and rebuild the Delta Flyer, they probably build quite a few torpedoes in their downtime. Maybe she put the crew of the Equinox on torpedo building duty.

[–] OZFive@lemmy.world 2 points 2 months ago (1 children)

It just got delivered today!

[–] OZFive@lemmy.world 1 points 2 months ago

Mine said the 16th.

[–] OZFive@lemmy.world 2 points 2 months ago (4 children)

I understand there are reasons not to buy a phone from a carrier. But when they give you $500 off, it's a little hard to resist.

[–] OZFive@lemmy.world 4 points 2 months ago (2 children)

The non-folds have been available for weeks. The Fold just went live today with T-Mobile.

 

Woke up early today and the first thought through my head was ... Hey, the Pixel 9 Fold Pro is going to be available today. So I jumped on the site and found it... backordered until mid October.

Anyone else able to get one on T-Mo or another service or are they backordered from Google themselves?

30
submitted 9 months ago* (last edited 9 months ago) by OZFive@lemmy.world to c/3dprinting@lemmy.world
 

A coven (according to Google, that is the correct grouping for wizards) of 15 Harry Potter figurines ready for my daughter's 7th birthday party to be colored in by her & her friends using some paint pens.

 

So my daughter is loving her new Ender 2 Pro and printing out Harry Potter figurines to paint. We have been using acrylic paint pens (easier at this age), they have been good, not great. We are having a Harry Potter themed b-day party for her and her friends. I am going to print out a batch of Harry, Ron, and Hermione characters for them all to paint after the play time limit at the trampoline park ends.

was wondering... What kid friendly paint works best for PLA?

 

I am pleased to follow up to this post with an update that the Tie-Fighters now all have engines and am halfway done with the solar collectors frames.

 

... for my daughter and the neighbor kids. All scaled to 200%.

printables.com/model/563813-t..

Going to throw on some fun colors for the canopies and solar collectors.

Overture Black Sovol White Overture Space Grey Overture Dual Color Silk Red/Gold

 

Good day! I am running a Klipperized Sovol SV06+ and have been getting some really great prints. I am however having an issue where lately I am having to adjust the Z offset with each new print. I did a first layer calibration and got a perfect result but after a couple prints I saw I needed to lower it to get a good first layer. Again I printed a few and then again I needed to lower it. This has happened a few times.

Yesterday I was printing a pretty large print and midway through the extruder shifted (the print remained secure to the bed) and continued printing. After I canceled the print I had to lower the Z offset much further than I thought was possible. I am concerned that the bed keeps "lowering".

I have a very good bed mesh loaded (used the silicone bed leveling mid I have seen discussed). I am just unsure why this is needing to be adjusted and why the last print went wonky (related?)

Thanks much!

view more: next ›