From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
Seems like your USB drive is formatted with a filesystem that doesn't support large files like FAT32, if you are able to, try formatting into exFAT in Linux with:
sudo mkfs.exfat -n LABEL /dev/YOURUSB
or in Windows by right clicking on the USB and clicking format.
Alright, I've used your code,
sudo mkfs.exfat -n LABEL /dev/sdb1
but the console returns this
exfatprogs version : 1.1.3
open failed : /dev/sdb1, Device or resource busy
exFAT format fail!
what's the problem here? I've cleared out all storage on the drive, and made sure that it isn't opened in the file explorer, and it shouldn't be reading/writing anything because it's empty.
thanks for the help btw
You must unmount the drive before formatting. And also know that formatting wipes the drive, so if there is anything on there you want to keep, back it up beforehand
And triple check the device path, you don't want to unceremoniously unmount and obliterate one of your non-system drives (shouldn't be able to unmount your system drive)
This may or may not be advice from learned experience
It not only has to be not 'open' in the explorer, but properly unmounted. Tools like mkfs dont do that for you, its just not their job. (and might be unwanted or stop your from making mistakes like accidentally overwriting the wrong drive)
try umount /dev/USBDRIVE
If that still complaints about Device or ressource busy, then something is still using it.
Either try to close things that might be the culprit, reboot and try again or, if installed and you are compfortable, you can check which processes using lsof -D <path where drive is mounted to> (you can get that location using mount | grep <path to usb drive>)
What file system is there on your USB drive?
When right-clicking the drive and selecting "properties", the filesystem type is stated to be MSdos
I found this
MS-DOS (FAT) - This is Disk Utility's name for the FAT32 filesystem.
https://www.engadget.com/2011-09-19-mac-101-format-choices-for-usb-flash-drives.html
So I think the advice about the FAT32 issue people mentioned is the issue :)
As another commenter mentioned, it's rather silly to use a USB stick to transfer files from one HDD partition to another. However, there's absolutely no need to use a Live USB session, and their description of how to access files on block devices was ... wrong.
There are programs you can find for Windows to access Linux filesystems, but those tend to be flaky; NTFS support for Linux is mature enough to accomplish what you need. You should be able to install NTFS support with apt and access the Windows partition like any other drive - I've done this. Googling "Linux Mint NTFS" should find you what you need.
Thanks, I edited my response.
their description of how to access files on block devices was ... wrong.
What was wrong about it?
/dev/sd* are block devices, not directories or mount points.
Does that mean you can't copy or rsync a file from one to the other?
That means that you have to mount them first.
Ok, thanks.
Sounds like the drive is FAT32 formatted. Max file size then is 4GiB. Compress it with bzip2 or 7zip or try the @bartolomeo's solution.
flash drive is probably formatted FAT32 and that file is too big for that format. reformat the flash drive to exfat.
Edit: nevermind, apparently I was wrong.
Theyd need a ntfs driver to do anything. If you try to do what you are suggesting without one, bad things happen. Unless that part of the partition isn't ntfs formatted.
For real? Even just cp?
We have a specific driver for reading and writing to ntfs for a reason.
What's the reason? Honest question.
Why do you think anyone bothered to write a ntfs driver if you could read and write to ntfs without it? Why do you think windows cant read ext4? What do you think file systems are?
I know where you're coming from.
The best way to be happy is to be kind. Seriously, just try it and come to your own conclusion. It works way better than trying to extract satisfaction from life, which actually just creates more dissatisfaction.
Sorry if it's a noob question, but isn't a live session something you do with a USB stick without installing? The file is currently on the Mint install I used to torrent it, along with my other daily-driver things.
isn't a live session something you do with a USB stick
Or, something you do with a fit Latvian girl...
Man, those guys who down voted you have no sense of humor. You made a sex joke in response to my video game piracy joke!
People suggested formatting to exFAT which is valid, but first you could just try either compressing the file (tar czvf file tarball.tgz for instance). FAT32 cannot handle files larger than 4GB, and compression might just make your file small enough.
As a workaround you could also split it in half and stich it back on the target machine
Use zip, rar or other tooling to split it into parts and reassemble on the destination.
Or use another filesystem, compatible with both targets.
It was already split by a fit Latvian girl of a Yarr-harr, fiddle-dee-dee persuasion, if you catch my drift. I really am afraid of fucking something up, so I'll try other methods before splitting it further.