3DPrinting

15525 readers

101 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee

Advice on first 3D printer (lemmy.dbzer0.com)

submitted 8 months ago by JollyTreecko@lemmy.dbzer0.com to c/3dprinting@lemmy.world

32 comments fedilink hide all child comments

I am looking to purchase a 3D printer as a hobbyist, not for any commercial use. I have limited options with local 3D printers but that's good as they're mostly cheaper low end printers so I can look at them thoroughly.

When I'm comparing the different 3D printers I'm mainly looking at the following: Cost, nozzle diameter, layer height, volume, and viable filaments.

My question is, is there anything else I'm missing? Are there important things I should be considering or avoiding?

Different printers have different resolutions but for my purposes it looks like they're all highly accurate and way past what I need. Not worried about speed either. They all mention bed and nozzle temperatures but I assume they are all within the necessary range for the filaments they allow right? So does it matter?

Also, any advice for maintenance? How to make it last as long as possible any mistakes I should be wary of. Thanks.

you are viewing a single comment's thread
view the rest of the comments

[–] Sphks@lemmy.dbzer0.com 7 points 8 months ago (1 children)

What matters :

Auto calibration of Z-offset (multi-points). Your bed will warp with time and you don't want to fight with it.
PEI magnetic bed. You don't want to fight with your things not sticking to the bed - or sticking too much. You may still have issues but less.

You will be happy with this as a cheap starter printer around 200$.

After some time, you may want to print bigger things, faster, and with ABS/ASA for technical parts. Then you could invest in a bigger printer, faster, hot and with an enclosure for ABS fumes and warping issues. The budget for this is 600-1000$.

[–] pineapplelover@lemm.ee 1 points 8 months ago

Neptune 4 is like $220. I have the pro version but the non pro is very similar if you're on a budget.

https://www.elegoo.com/products/elegoo-neptune-4-fdm-3d-printer