atomicpeach

Acrylic paints are your friend here. They last a long while in their bottles and you can keep a palette for a few days when using a wet palette. start with just using a brush and jump up to an airbrush if you want to cover a bigger area or do fancy stuff (an air brush is far from required). As another commenter said, the minipainting community has a ton of resources, text and video tutorials, and willing to provide constructive feedback if you want it.

Just remember: thin your paints~

Maybe look at Astro and develop a lightweight blog post admin panel to create, edit, and delete posts. Should be relatively easy and you should be able to render out a static site from it each time you need to update it.

I've had a lot of success taking the rules that YNAB uses and applying to my own budgeting method. I recommend checking out Actual Budget if you're capable of self-hosting and want a fancier software instead of a spreadsheet. The rules are key, though; pick a methodology/mindset you agree with and stick with it.

It depends what you are painting! If you're looking at smaller models/tabletop minis, you should take a look at setups used in the minipainting communities. Larger models might benefit from different setups. I know I didn't want to start cheap and have to upgrade later, so I jumped straight for the Iwata HP CS. The dual action is super nice to have (not a must have though). I'd also recommend spending more on a better compressor before a brush (I got a simple 1gal compressor from California Air Tools).

They have a few plans, but the cheapest is $5/mo. If you go past the allotted searches it's pay per search after that (at a very tiny cost).

I switched to DDG when Google started adding cards at the bottom of the first page and made search results utterly useless for me. DDG wasn't bad but it still felt like something was missing or some results were flooded by a specific site. Kagi went the extra step to group results from a site sorta like how Google has.

Ultimately it's the benefits of old Google but some nice refinements and QoL improvements. Because it's paid for, they don't need to sell your data or shove paid for results down your throat.

I was informed about Kagi through one of the posts here and tried it out. It's quite amazing how much better it is compared to even DDG. I didn't mind DDG but it felt "old" but Kagi seems to prioritize user experience over everything else. It may not be free, but it's worth the cost for me.

The term you are looking for is "parametric". You might be able to find a design you need through the many 3D printing file sites using that term. FreeCAD and Fusion360 are open used but another is OpenSCAD if you are more programming savvy than modeling savvy. There are plenty of recipes for threads in there to make your relatively simple design request here.

Tons of good and free options, you just gotta pick which one looks easiest for you.

From the article, you can get a detailed usage history of MTA transactions by simply supplying the credit card number (which they state can very often be bought on the dark web). The lack of identity confirmation to pull the report is the concern.

Because you're tied to their DNS without paying a hefty fee to use outside name servers. But there's always Porkbun for nearly as cheap but no strings attached.

Keep in mind that any hobby printer, especially those under ~$/€1k are subject to needing some level of tinkering to get reliable printing. If speed is unimportant, any of the options you provide will be a good fit. You will benefit from running some basic tuning for each spool of filament to get the best print quality. The speed can be dialed in to reduce failures but not take forever.

Build plate finish is more of a personal preference when it comes to PLA. Textured plate will provide slightly better grip to prevent the print from popping off mid-print, but it's a visible and tactile texture to that surface. It would probably be best to have a both a texture and smooth plate on hand long term.

Enclosure mainly comes into play if you print high-shrink materials like ABS or ASA. If you don't like to tinker, I wouldn't try to enclose a prusa or ender and would save up for a design built for it. If you don't mind tinkering a bit, you can always add the enclosure later.

Buying a used printer isn't a terrible option, but I would get eyes on first to ensure it prints as-is, especially since you want it to be plug and play. People sell printers for a variety of reasons such as upgrading, lack of interest, lack of funding, etc.

Another vote for Porkbun here. I switched after Google Domains shared they were selling off to Squarespace. It's been a lovely experience and their website just seems more human than the other big players. Cloudflare isn't a terrible alternative option as long as you'll be using their DNS.

It's a mobile game, but Sandship kinda checks all those boxes.