MxRemy

joined 1 year ago
[–] MxRemy@lemmy.one 6 points 3 months ago

I've never heard of mujico, either positively or negatively. However, if your instance was blocked by my instance or by lemmy.ml, wouldn't I not be seeing this post?

So, what's your instance about? I'm intrigued!

[–] MxRemy@lemmy.one 3 points 3 months ago

In the context you've given, sure! I like it but I have trouble believing people when they say it.

[–] MxRemy@lemmy.one 0 points 3 months ago (2 children)

Not saying that the person in the post is correct in conflating those words, I don't think that's accurate at all.

However, it is disheartening to see so many ill-informed comments about fatness here... It's way, way more complicated than just "calories in/calories out". Even the extent to which it's unhealthy is more complicated; obesity is linked to higher risk of heart disease, but also linked to higher probability of surviving strokes/etc. A lot of the problem stems from the fact that BMI is a nearly useless metric.

[–] MxRemy@lemmy.one 19 points 3 months ago (4 children)

One of my boyfriends is in the middle of forcing me to watch all of Naruto, and honestly I hate it so far? Once you're a couple seasons into Shipuden they interrupt every single episode of actual progress with like 5 episodes of unnecessary flashbacks. Also the message is terrible, it's misogynistic as hell and damn near fascistic.

For the One Piece fans here, I'm getting the impression that it's like almost exactly the opposite. Is that true? If so we're watching that next for sure.

[–] MxRemy@lemmy.one 7 points 3 months ago
[–] MxRemy@lemmy.one 3 points 3 months ago* (last edited 3 months ago)

The reason you can't afford food is because precariousness is baked into the system, it's a necessary component to force people to participate in capitalism largely against their will, whether they realize it or not. So, in that sense, surviving in any other way than by selling your labor is at least a little revolutionary, isn't it?

[–] MxRemy@lemmy.one 9 points 3 months ago

The outlawing of supreme leaders.

[–] MxRemy@lemmy.one 13 points 3 months ago

I do! We have them where I live and this has happened to me too lol. I like to consider it a sign of trust that they're willing to get that close to me, even though it's more likely they're just kind of oblivious. Although, they do have the best eyesight of any centipede... so who knows!

[–] MxRemy@lemmy.one 4 points 3 months ago

I feel like my answer might break AskLemmy's rule 2 about "Overt Politics", but so do a lot of the other answers? Feel free to delete if so.

overtly political answer, also CW for violence.As far as the current American system goes... nothing. By and large, even laws that seem good are mostly only used in service of the elites, against the people. Consider this series of events:

  • In 2015 a white supremacist in South Carolina commits a mass shooting, killing 9 people.
  • In 2017, the Georgia state gov expands the state's domestic terrorism laws, directly in response to this shooting, because the previous version wouldn't have covered it.
  • In 2022, this expanded law gets used... against people protesting police brutality, who hurt no one, despite the fact that the cops killed one of them.

Unfortunately, this general sequence is not uncommon at all. Neither is the inverse, where the bureaucrats/judges/etc decide "that doesn't count, actually" when it comes to an elite very clearly breaking an existing law, or else changing the law so it doesn't apply to them in retrospect.

[–] MxRemy@lemmy.one 62 points 3 months ago* (last edited 3 months ago) (10 children)

Please be nice to house centipedes, they're friends. They won't hurt you.

EDIT: Sorry OP, I shouldn't have assumed any ill will, you seem cool!

[–] MxRemy@lemmy.one 46 points 3 months ago (3 children)

Patron using the computer: "Your Google is broken! No matter what I search, it just shows me books!"

Me: "...you're typing in the library's catalog. This isn't Google."

 
 

Hi c/FreeCAD, totally newbie here! I'm having a ton of fun learning FreeCAD, but I have a small question. I know the toponaming problem is going away soon, and maybe that makes this kind of irrelevant, but I'd still like to know.

Sometimes when I'm watching or reading guides on avoiding the toponaming problem, the person will say something along the lines of: "actually this technique is also more professional/proper/correct anyway, real engineers do it this way." Basically that the methods that avoid the problem are also just best practices in general. But they always say that as kind of an aside, and I wish they'd say more! What makes those methods better? Does anyone have any suggestions for articles or videos about this?

For one example, there was one guide that suggested you should use a datum plane instead of referencing one of the object's surfaces. I understand the toponaming problem well enough to get why referencing a surface can cause it. However, the person in the guide used the same surface that would have been referenced, as the attachment point for the datum plane. Why does that not produce the same issue?

 

So about half a year ago somebody posted about Faircamp, a self-hosted open source alt for Bandcamp. It's really awesome, but I thought people might also want to know about a new one called Mirlo. This one is also open source, so it could ostensibly be self-hosted if you wanted, but the main thing is that it's got this flagship hosted option. Very similar to the Bandcamp experience, from the musician side. No techy stuff required at all, so I think this one might be way more user friendly for non-tech savvy folks!

AFAIK, neither Faircamp nor Mirlo have integrated ActivityPub support yet, but it seems entirely possible. Both do currently support subscription via RSS. Honestly I kinda feel like both platforms should collaborate, if they aren't already!

Maybe they could even get hooked up with RadioFreeFedi and do like featured artists and stuff.

 

Hopefully this kind of content is ok here. Up until recently, when I would be searching for some kind of technical info, the top (and best) results would usually all be Reddit posts. I was very pleasantly surprised to do that this time and find a Lemmy post instead!

...It did happen to be a post from me, so unfortunately didn't answer my question at all, but I still thought it was really neat and wanted to share. Has anyone else seen Lemmy stuff getting indexed and turning up in their search results?

 

Hi DIY punks! I need a little help with something. I've been trying all sorts of ways to home carbonate things as sustainably as possible. Most have not really worked out as intended, but I'm really really close on this latest attempt. This version is to connect a CO2 tank to a whipped cream dispenser.

Basically, the path from the tank looks like this:

...and the path from the dispenser looks like this:

So, I need an adapter to hook up the 3/8"-24UNF female to the mystery connection. It seems to start screwing in for a couple turns, but then won't go any further, so my guess is that it's the same diameter with different threading? Note that, in the link for the mystery hookup, I removed the TR21-4 at the end, because that's for directly hooking up to a small tank. The mystery connection I'm talking about is the male threaded part you can see screwing into the TR21-4 connector.

It doesn't seem like many people are doing this, or know what most of the industry standard connections actually are. See this thread here for example. Consequently, I have no idea if the mystery eBay hookup I bought even works, despite that being its entire purpose. The interior of the CO2 cartridge puncturing mechanism is a black box to me, so I'm just trusting this M22 connection is all that's required. There's definitely some kind of one-way valve in there, but hopefully it doesn't somehow require being "pushed" by the cartridge itself.

 

For the first time, I had a lot of Illinois Bundleflower seeds to harvest. I've never cooked or eaten them before, and information online is pretty slim unfortunately. So, I just took a stab at something random. For the filling:

  • Desmanthus illinoensis seed/grain
  • Manoomin
  • Dried crushed rockweed
  • Black bean miso
  • Vegetable stock
  • Cheddar

...all stuffed inside a white scallop pattypan squash. It was... about as okayish as it looks, not fantastic, not terrible. Honestly I thought about posting it to c/ShittyFoodPorn instead 😅

More importantly than the quality of the dish, it turns out Illinois Bundleflower seeds are easy to cook and have decent flavor and texture! So, task failed successfully I guess? Thank you for your time!

 

Sounds pretty good! It's printed out of PHA (polyhydroxyalkanoates). This is a food safe naturally occurring material synthesized by bacteria, and it is fully biodegradable in a reasonable time span, in any biome, with no microplastics. Design from SolidZone, material from Filaments.ca Regen collection. Once the world figures out how to get sustainable pinene resin working, I want to try running a vacuum resin stabilization on it as well.

 
 
 

Some friends and I are trying to learn Haxe together by working on a simple game. We're all like pretty much total amateurs at this stuff. For collaborating I set us up a repo for it on Gitlab, and I've been trying to run the actual code through Gitpod, but I can't get it to work... Has anyone else done this successfully?

Just to focus on ONE error at a time, here's this: I get a workspace loaded up seemingly successfully, with Haxe installed. But when I try to run haxelib setup for all the requisite libraries, it asks me for an install directory, and I apparently do not have write privileges?

 

Is there a Fediverse option for hosting fanfiction, or maybe web novels/serials/etc? Like an AO3 alternative, basically. I looked around but couldn't find one, the closest thing that kinda works are the blogging platforms like writefreely. If there isn't, do you think fanfiction would be a good candidate for federation?

view more: next ›