HumanPerson

This happened at a very inopportune time so apologies for the text being a bit bad. background: framework laptop 13 with 7640 u running fedora 40. ran great for a few months. issue: played some games on battery power. battery health went from mid 90's to 43. i know playing on battery is bad for it but that is more what i'd expect if I took a hammer to it. what i've tried: rebooted, cleared upower history, removed 90% charge limit in bios then shut down and charged.

Any thoughts would be appreciated.

Edit: I ran it out of battery while on the bios screen then charged it to full before powering it on. Battery health is now showing 91%. I'll see if it lasts, but I'm glad I didn't just go out and buy a battery without troubleshooting first.

Basically title. I think the whole ACT test prep industry is just completely scummy, but I do need to take it. Does anyone know where to find stuff like this? I'm sure the demand exists considering how much they jack up the prices for this kind of stuff. Thanks in advance.

I have been not recommending Ubuntu to people because of obvious reasons (the Amazon search integration and snaps, mainly). The reason I am posting this is because someone I know mentioned that they are considering Ubuntu. They have a degree in cs and generally are competent with computers, but didn't like mint when they tried it. I would like to know a few things, since I haven't looked into Ubuntu in a while:

Has anything changed about snap? I know people didn't like it at first, especially the proprietary server, but I don't think they will care about that and I mainly just want to know if it will eat all their RAM or something.

Have they made any changes in their management that may make sure there won't be another Amazon search thing?

Is it best to use the default desktop on Ubuntu? I would recommend Kubuntu to them, all else being equal, but don't know if maybe the default one is better integrated.

Edit: The person will be 100's of miles away so helping them with issues will be hard, and Ubuntu LTS should be stable. Plus, basically everything that "supports" linux but doesn't really usually supports Ubuntu. I do really see where they're coming from, but want to know if it has a major potential to backfire on them and if they might be better off with Fedora.

I recently built a computer for someone. It was just for general use, not gaming or anything, so I went with fairly simple specs. Because they wanted an insanely quiet computer, I went with an NHD15S. The problem is that cooler causes flexing in the motherboard that makes the CPU not make contact with the socket. Is there a not overly janky way that I could fix that without getting a smaller cooler? I know flexing is the issue because it works for a while with the big cooler, but eventually won't boot after being shut down, or crashes in weird ways and then won't boot, and the mobo lights always show a CPU and dram light. The box cooler has no issues, but is louder under load.

Edit: it does boot with the large cooler if the system is on it's side. I followed the mounting instructions carefully.

Edit 2: Solved. I was overtightening.

I am currently out of town, and my server went down. All my services go through nginx, and suddenly started giving error 502. My SSH won't let me in. I had my sister reboot the server, and it still doesn't work. I apologize for the lack of details, but that is all I know, and I can't access logs. I've cleared cache, and used a VPN in case fail2ban got me. I recently got a tp link router, so it could be something with that, but it was working for a while. I will have her do another reboot, and if that doesn't work I will have her power off and unplug the server in case it was hacked.

Edit: I have absolutely no clue why, but it works now. I literally did nothing. As far as I know, my sister hasn't touched it today. It just started working. Computers, man...

Edit 2: Actually she said she did something. Not sure what, but it works now.

My family needs a new router to replace the old (though not old enough that it should be dying) netgear router that is slowly dying. I want to do something with good foss firmware like opnsense or openwrt. I was thinking that the BananaPi options look good, but had some concerns. I would like to install the firmware myself, rather than trust that the manufacturer didn't modify it in any way. I don't know if the pre-made openwrt bananapi routers can be flashed with custom firmware easily. Also I need something with wifi (ideally wifi 6 or better), though would be willing to consider a separate WAP. VLANs would be nice too, but I could live without them. Have any of you done this? What has your experience been, both with install and long term? Is there anything I should look out for that I might not think of? What resources can I use to find out more about this?

Edit: This is the one I'm looking at. Sorry for linking to Amazon but I used FF's remove tracking from URL feature. https://www.amazon.com/youyeetoo-BPI-R3-Development-MediaTek-Support/dp/B0BLVF9697/ref=cm_cr_arp_d_product_top?ie=UTF8

I just wanted to post this here because I want to help you all and hurt gen.xyz as much as possible. I had a .xyz domain through njal.la which I used to host jellyfin, homeassistant, and other basic things for friends and family. My domain recently became inaccessible without any notice. After a while of troubleshooting, I found that it had been reported to xyz as abuse, and they must have done zero investigation whatsoever before serverholding my domain. I thought about opening a ticket with xyz to get my domain back, but realized that I no longer wish to buy from some shitty company that will take down any site without warning. Bought a .com domain since they are somewhat reputable, and I would advise everyone here to never buy a .xyz domain. Angry rant over.

Currently, I use Debian on my server. I have an Intel Arc GPU that I use for transcoding, however hardware encoding doesn't work. I am able to get a slight performance benefit from decoding, but encoding would be much better. I have an A750 in my desktop (not server), and was able to get hardware acceleration working, but only with openSUSE Tumbleweed with the stable kernel (6.9.4). While I would love to have encoding, (I am limited on upload speed and av1 encoding isn't practical on the CPU for multiple streams), I doubt it would be stable using a rolling distro and non-standard kernel. Has anyone else tried anything like this? Are there any arc + jellyfin users out there who know any way to make this work, or any openSUSE self-hosters could vouch for its stability? I am willing to try almost any distro (except ubuntu) to make this work.

Edit: fixed. There was some firmware I needed to work on debian. I will link and such in a bit when I have time.

Hello. These questions are self-hosting related, but I feel they do partially belong here as they are also about fedora linux in general. I have a server which is currently running Debian. It has an arc GPU, and no matter what I do, video encoding refuses to work. I was thinking I might move it to Fedora, but have some questions first.

1. How are Fedora's updates? I believe they are about once a year, so how is it to switch between versions? I can deal with annual maintenance, but don't want weird issues causing downtime.
2. Also about updates, how should I do auto updates on fedora?
3. I am currently on apparmor. I know seLinux has more features, but I have also heard that it can be annoying to deal with.
4. I mentioned the arc GPU. Has anyone managed to get video encoding working on it on fedora? If so how?

Edit: also, how is it to move a raid over. It is mdadm raid 5 with ext4. It is VERY important that nothing happens to the data, unfortunately I have not yet implemented a backup, although I do intend to soon.

Basically title. I have a 7600(x)(t) 8G. I want drivers with opencl for hashcat. I know the proprietary ones work, but they are a ludicrously massive PITA. I am willing to use almost any distro to make this work (not Ubuntu, and not one of those random newer ones). I really hope I don't have to use the proprietary drivers.

Edit: found a good enough solution. I listed the card on ebay and will replace it with an intel arc soon.

The video is an old one about Katrina. I need it for homework. I have tried accessing it from CNN's website but CNN in their infinite wisdom put DRM on the video that is publicly available, and I assume that is why it doesn't work on mull, librewolf, or chromium (all show same error about neon request failed). I looked on the generic torrent sites to no avail. Any response would help, the questions are very specific to the video and it is due soon.

I recently found this on Reddit while looking into why jellyfin is effected so much by latency. I found that this worked and thought I would share it because it is generally applicable, takes five minutes to setup, and helps a lot with bandwidth on higher latency connections. I admit I am not sure of the technical stuff behind this, so if anyone would like to chime in that would be much appreciated.