3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I upgraded two Prusa MK3s to MK3.9, and ended up with a couple of spare boards, stepper motors and a bunch of other things. So I decided to turn them into a Makelangelo clone!
Since the school I work at had these large standing whiteboards, I designed and printed corner brackets to hold the motors, as well as a base for the electronics.
I'm still having trouble with the homing process, but very happy with the results so far!
I'll be posting the firmware and 3d printed files online soon.
What the what? Did you just turn a 3d printer into a 2d printer? This is amazing! Only a 1d printer would astonish me more!
... Would that be a seismograph?
Im afraid it would just be a thing that makes perfectly straight lines :(
That you couldn't see, since they'd have no thickness, only length
Maybe a printer that adds Morse code on a string.
That's still 2 dimensions.
How do you keep the pen tips vertical position accurate as it pens around without something dragging in the drawings?
I'm not perfectly sure I understand your question, but if you see it in action, this thing is really wobbly. Not much precision there.
I was basically just asking how wobbly it is, haha.
That's really cool!
You’re amazing
So are the vertical cutoffs either side the result of string length, or what's going on with that?
It can go further than that, i just limited it to a smaller size for my first real test. I told the software that I was drawing on an A1 sized paper. Drawing this across the full board would have taken forever.
There are a couple of no-go zones close to the corners. Longer belts would allow it to go lower, but then the counterweights would hit the floor when going up high and limit the drawing area there instead.
Would a block and tackle solve that problem? Could 3d print them likely.
Hmmm, only if a second pulley was higher than the motor, I imagine.
You can use multiple pulleys and shackles to take the distance of the rope up.
It’s how they do it inside of machines as far as I’ve seen.
I still feel the distance they travel will stay the same. Except if I use a gear train.
Using #4 would allow you to move the pen 40cm for every 10cm of counterweight travel.
Ah yes, different sized pulleys would work the same as the gear train I had in mind. Thanks for the explanation!
Edit: on second look, it's more complex than that, as the weight is not connected to the end of the rope, but on a pulley.
Likely number 2 would be enough, would double the distance itself. You just need to attach it to the same corner bracket and have a pulley with the weight under it.
neato. Cool project.
I've been thinking of doing just this as well. Though with ender parts or something else left over. Very cool to see someone's actually made it happen.
You should check this post out if you ever go ahead with it: https://www.marginallyclever.com/2021/10/friday-facts-4-how-to-marlin-polargraph/