Solarpunk technology

2367 readers

54 users here now

Technology for a Solar-Punk future.

Airships and hydroponic farms...

founded 2 years ago

MODERATORS

poVoq@slrpnk.net

KeraKali@slrpnk.net

bot@slrpnk.net

Better electric power generation (slrpnk.net)

submitted 9 months ago by Petros@slrpnk.net to c/technology@slrpnk.net

8 comments fedilink hide all child comments

There are two priorities I keep in mind, when thinking about collapse-time technologies.

Maintenance complexity, especially in long-run context.
Shortening the supply chain.

When it comes to electric power generation and various types of generators, I am very reluctant to accept generators based on rare-earth magnets. First, they are "bloody metals" indeed, mined and refined with extreme hurt to the planet and people. Second, their delivery chain is long and quite centralised which makes them possibly unavailable in case of disruption of the logistic system. While we wait for the US-sponsored program to develop alternative materials, still we can explore two avenues of research:

magnets recycling
generator constructions that does not need such magnets.

The recycling topic deserves separate consideration, in respect to a hypothesis of the "scavengers civilisation" as the next stage of human history. Meanwhile, we can have a closer look at constructions, using much more sustainable ceramic (aka ferrite) magnets, or no magnets at all.

If we can develop a "DIY" technology to make ceramic magnets, we can combine it with designs from 19th and early 20th Century and create alter-futurist line of more collapse-friendly electricity generators.

top 8 comments

sorted by: hot top controversial new old

[–] keepthepace@slrpnk.net 17 points 9 months ago (1 children)

A few remarks from your friendly neighbor open hardware preacher:

Magnet-less techs do exist, and do not need to be found in 19th century designs, which are usually very energy-inefficient. Modern knowledge of magnetic leakage, more efficient electronic drivers make these designs usually a bad idea.
Open source hardware motors are a thing
The crucial part in making good motors without using too much labor is actually in the coil winding machine that goes with it. Here again, open hardware is in business.
Rare earth are badly named. They are not rare and most of them are usually a byproduct of the refinement of other minerals.
The USGS published yearly reports on minerals, their production, reserves and strategic importance. Here is the 2023 one on rare earths
China produces a lot of them only because it has cheaper labor, US and other countries have tons of reserve.
Iron magnets are easy to make (heat iron and let it cold inside a magnetic field). I believe that rare earth magnets are basically the same with an alloy with a different Curie temperature.

[–] Petros@slrpnk.net 2 points 9 months ago (1 children)

Great contribution, thank you. I am an admirer of 19th Century engineering and inventions, and it is good to have someone around, to ground me, so to speak. 😆

By your permission, I would like to tap more of your knowledge.

[–] keepthepace@slrpnk.net 1 points 9 months ago

Thanks! And yes, no problem

[–] Sibbo@sopuli.xyz 7 points 9 months ago

Any power plant operating today uses electric magnets in their generators. So this is not an issue, as long as there is a way to power the electromagnets when turning on the plant.

[–] scratchresistor@thelemmy.club 3 points 9 months ago* (last edited 9 months ago) (1 children)

If we were starting from scratch, iron is about as common as it gets, geologically, not to mention how much "leftover" iron and steel there would be, post collapse. Barium/strontium for sintering ferromagnets is trickier, but ores like witherite and baryte aren't uncommon, though they are quite location specific, globally speaking. Not that you don't actually need full blown permanent magnets, just ferromagnetic material.

However, the easier (though less efficient) option would be to use dynamos with field coils instead of ferromagnets. That way the only resource you need is wire.

[–] sonori@beehaw.org 1 points 9 months ago

Ya, while more efficient, using permanent magnets was relatively rare for motors and generators until recently, and is very rare when it comes to large scale generators. Not only is it extremely expensive, but permanent magnet generators have trouble dealing with damping reactive power and high frequency grid oscillations.

You do see them more frequently in smaller generators, like wind turbines or micro hydro, as well as DC motors, but for things like dams and thermal sources not so much.

Most large three phase motors, the kind you need for agriculture and industry, also tend to use field windings, though permanent magnet ones arn’t nearly as rare.

If rare earths became a lot more difficult to source it would be inconvenient for some industries, especially for wind and solar expansion, but by and large I doubt most people would notice.

[–] aubeynarf@lemmynsfw.com 1 points 9 months ago (1 children)

which is more difficult to obtain, iron based materials for permanent magnets, copper for field coils?

[–] Petros@slrpnk.net 1 points 9 months ago

I believe the answer will depend on local circumstances. The copper will always be needed - it is a matter of mix proportions. As long as we can keep the supply chain short-ish and local, we are good.