There is a fan running and then the actual microwave itself. If you lower the power setting, you can hear the fan stay on consistently but hear the microwave shut off and on. If the power is at 100%, the microwave runs the entire time.
Ask Science
Ask a science question, get a science answer.
Community Rules
Rule 1: Be respectful and inclusive.
Treat others with respect, and maintain a positive atmosphere.
Rule 2: No harassment, hate speech, bigotry, or trolling.
Avoid any form of harassment, hate speech, bigotry, or offensive behavior.
Rule 3: Engage in constructive discussions.
Contribute to meaningful and constructive discussions that enhance scientific understanding.
Rule 4: No AI-generated answers.
Strictly prohibit the use of AI-generated answers. Providing answers generated by AI systems is not allowed and may result in a ban.
Rule 5: Follow guidelines and moderators' instructions.
Adhere to community guidelines and comply with instructions given by moderators.
Rule 6: Use appropriate language and tone.
Communicate using suitable language and maintain a professional and respectful tone.
Rule 7: Report violations.
Report any violations of the community rules to the moderators for appropriate action.
Rule 8: Foster a continuous learning environment.
Encourage a continuous learning environment where members can share knowledge and engage in scientific discussions.
Rule 9: Source required for answers.
Provide credible sources for answers. Failure to include a source may result in the removal of the answer to ensure information reliability.
By adhering to these rules, we create a welcoming and informative environment where science-related questions receive accurate and credible answers. Thank you for your cooperation in making the Ask Science community a valuable resource for scientific knowledge.
We retain the discretion to modify the rules as we deem necessary.
A few microwaves don't do that because they're able to continuously run the magnetron at less than full power by using an inverter instead of a transformer.
Why do microwaves hum
Because they don't know the words, obviously
you're hearing the magnatron's power supply
Could it be the motor?
The second harmonic from 60hz is 120, which is close to where your hearing it? For what its worth, i get a peak at 100hz, which for the australian grid would make sense?
I used this app: https://play.google.com/store/apps/details?id=org.intoorbit.spectrum
I dont see a 50hz peak, but 100hz was clearly represented.
I checked against a tone generator, and realized that the lower frequency was actually 120, not 60, so I'd guess you're probably hearing that. That puts the higher frequency at 212-214, which I also checked and that range matches what I'm hearing (for 100hz, it should be at around 177-180).
Interesting. I saw mostly 38Hz, 117, and 240. 100W LG microwave on US 60Hz with an audible fan.
Mine is also LG, not sure what its power output is, but i think its either 1000W or 1200W, yours must take forever to heat anything 😉.
50 / 60 hz from the transformer under load?
Do you also observe this when running the microwave on max power? Usually, when a microwave states its 800 watts but you can adjust it down, it actually only changes the duration that power is supplied. So 400 watts would be 50% of the time the power is supplied at max.
I honestly have no idea, and never before knew that I do not.
There are two things making noise in the microwave when it's running. There's the transformer that's making the high voltage for the magnetron, which is you 120 Hz noise you're hearing.
The other noisy thing in the box is the fan. The fan is most likely a three blade metal fan running on a little shaded pole induction motor. That motor is very simple, just one moving part, and two poles. Two poles at 60 Hz gives us 3,600 RPM, which the motor can't quite reach because as the RPM gets closer to that magic number of 3,600 rpm, the motor draws lesa current and makes less power. This difference between the speed the motor is trying to run ("syncronous speed") and the actual speed is called the "slip" and is probably around 3%-5%. This gives us a fan speed between 3400 and 3500 rpm.
I don't know if that is giving you the second noise you're hearing, or if it's mixing with the transformer noise to make it. But now you've caused a situation where I'm going to be caught holding a guitar tuner to my microwave.