homeassistant

12053 readers

46 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

Home Wiring (lemmy.ml)

submitted 3 months ago by abeorch@lemmy.ml to c/homeassistant@lemmy.world

16 comments fedilink hide all child comments

This might be tangential to HomeAssistant but Im currently thinking about a household renovation and one thing I am considering is wiring.

I have some POE devices along with many other that run with a 12v DC supply.

I'm lookin at putting in a relatively straightforward 12v battery UPS with a small solar panel to charge. I probably only have space for 1500W of panels so putting in a whole grid tied solution is overkill. Primarily this is to provide backup as we sometimes lose power.

Networking wise I think I will put RJ45 into each room as we are concrete reinforced construction and so signal quality is an issue.

My query was how feasible it is to run both standard PEO devices and 12v devices (1-2w) all over POE.

I thought the alternative would be to run separate 12v cables with USB connectors at the end into each room as well as Rj45

Is anyone else doing this in their home?

you are viewing a single comment's thread
view the rest of the comments

[–] thr0w4w4y2@sh.itjust.works 8 points 3 months ago* (last edited 3 months ago) (1 children)

I’m using PoE Extractors to run some regular 12vdc stuff using existing ethernet cabling.

A couple of points to note:

network switches won’t turn on power by default unless the receiving device asks for it using the right protocols, so you need to inject the power using the corresponding PoE injector at the other end of the cable. you can’t just snip the end off a RJ45 and wire it into things.
Cat cable won’t take high currents, be sure to stick within the allowed range for the cable or it will melt and maybe bust your device
there is a voltage drop over distance, be sure to calculate if you need to change your transformer as 12vdc could become 9 or lower by the time it gets to your device
there are some really poor quality PoE injectors/extractors.
running mains cable and having a transformer nearer the device might be simpler and cheaper in the long run.

[–] abeorch@lemmy.ml 2 points 2 months ago (1 children)

The specs for latest versions of POE go up to 60-100W which is way beyond what I expected. Is that just still running over normal Ethernet or should I be looking for specifically rated stuff?

[–] thr0w4w4y2@sh.itjust.works 2 points 2 months ago (1 children)

You can get that kind of power through a Cat6a or Cat7 ethernet cable but a lower spec cable won’t work. here’s an article that talks about the limitations https://sixtytrend.com/can-cat5e-do-poe/

[–] abeorch@lemmy.ml 1 points 2 months ago (1 children)

Really useful thanks. Definitely sounds like I will be thinking about the Cable Cat more carefully.

[–] thr0w4w4y2@sh.itjust.works 2 points 2 months ago

definitely run two cables for each point. nothing beats having a cable be broken somewhere in the walls with no way to repair it.