Ask Electronics

3307 readers

12 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de

[Request] Components/Tools List for DIY, analog 'Beginner Electronics' Kit? (leminal.space)

submitted 5 months ago by fenndev@leminal.space to c/askelectronics@discuss.tchncs.de

8 comments fedilink hide all child comments

I'm new to electronics and looking to assemble an array of components and tools for working on and designing electronics & circuits. Something immediately apparent is that all of the widely available kits orient you towards working with microcontrollers and SBCs; these kits are cool, but I want to have a halfway decent understanding of the underlying analog components and circuit design before I go digital.

With that in mind, what should I get? If anyone could specify specifics to look into, I'd really appreciate that! Thanks for the help.

Current list

A decent breadboard
Jumper wires
Multimeter
Batteries
Variable Power Supply?
Assorted resistors (1Ω-?)
Capacitors (Electrolytic and ceramic?)
Various ICs?
Transistors?
Diodes, probably?
Potentiometers

you are viewing a single comment's thread
view the rest of the comments

[–] BigDanishGuy@sh.itjust.works 1 points 5 months ago* (last edited 5 months ago)

I think I understand now. I've taught intro to electronics for years, and I'd recommend you start out experimenting with resistor networks and measurement techniques. In that case you really don't need to spend much. All you need is:

breadboards, plural
a resistor kit
some battery holders or clips
jumper wire, just get the cheap bundles with only plugs and no sockets.
pliers and sidecutters. Spend more than 3usd on the sidecutters, and do not use them for anything but thin wire and component leads.
a decent entry level multimeter, a unitrend ut33a can be had for about 20usd plus shipping on ebay, and is fine for starting out.

Try designing networks of resistors with pen and paper, calculate voltages across the individual resistors to get familiar with Ohm's law and Kirchhoff's circuit laws (BTW don't attempt to understand Kirchoff using Wikipedia, someone wanted to flex their brain when writing that article). Build more and more advanced circuits, start out with series, then parallel, and finally mix series and parallel resistors. Try to work out the power draw of each resistor, and just once try to blow one up... On purpose, that is :)

When you've sorta got the hang of it, you can progress on to adding capacitance and inductance in you circuits, or digital logics, or what ever you like. But getting the hang on basic circuit theory? well, that can take some time.