this post was submitted on 11 Feb 2024
9 points (100.0% liked)

Buildapc

3850 readers
44 users here now

founded 2 years ago
MODERATORS
Lemmenmo@lemmy.world
9
Display issue (lemmy.world)
submitted 10 months ago by Lime66@lemmy.world to c/buildapc@lemmy.world
32 comments fedilink hide all child comments
 

I finished building my PC recently. when I turn on the monitor when the computer isn't on, there's obviously no signal and I see the bouncing logo, but when the computer is on, it says that there is no signal, and that my monitor is going into standby mode, and the display turns off. my gpu seems to be working fine, and I reseated my ram. What should I do?

you are viewing a single comment's thread
view the rest of the comments
[–] SorteKanin@feddit.dk 5 points 10 months ago* (last edited 10 months ago) (1 children)

You should lookup your motherboard manual or something to see what the LEDs mean. From what you say here, it sounds like the POST might be failing due to the CPU. Maybe try reinserting the CPU.

It could also be that it posts but then it should display and let you get into the bios. So not sure. It's hard to diagnose without more info.

[–] Lime66@lemmy.world 2 points 10 months ago (1 children)

The light means that the CPU is not detected, but it turns off quickly

[–] Exulion@lemmy.world 1 points 10 months ago (1 children)

Try reseating your CPU, check the pins to make sure you didn't bend one. Taking some photos and zooming in can help you get a better look.

[–] Lime66@lemmy.world 1 points 10 months ago (1 children)

According to the manual all of the lights are supposed to turn on briefly.

[–] Exulion@lemmy.world 2 points 10 months ago (1 children)

Sorry got busy and work. Any luck? None of lights stay on?

If not I would just double check and reseat everything, and for shits and giggles pull the cmos battery for 30s and put it back, if you haven't already.

If nothing else works I would be thinking about RMAing the mobo.

[–] Lime66@lemmy.world 1 points 10 months ago

Only the boot light stays on even though I have a boot device. (And am trying to boot into bios)