this post was submitted on 26 Aug 2023
14 points (100.0% liked)
homeassistant
12034 readers
108 users here now
Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io
founded 1 year ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
I would be comfortable with that, but I definitely prefer devices that retain the wall controls like a normal wall switch. And will work even if the smart home goes down. I should have mentioned that in my post.
The ifan has a remote, so not quite a wall switch, but still doesn't require HA to make things happen.
I just installed one in a fan in our dining room as a test. Flashed with Tasmota.
That's totally fair. In my case I was also limited because the location originally had just lights (so only hot+neutral+ground) but if you want to control lights+fan separately you need at least 3 wires+ground (common neutral, shared ground, hot for fan, hot for light).
In your case, maybe something like the Treatlife DS03 might do the job? I've never used it myself but it does have separate wires for load and fan-load, there's a Tasmota template, and still did a fairly decent write-up
Yeah your solution would be the best if I didn't have fan wiring going to the wall. I wouldn't want to make the wall switch totally obsolete.
I looked at the Treatlife but apparently they changed the chipset and it's no longer flashable :/
Ah, those freaking WB3S chips area huge pain in the ass we they've been replacing the ESP Tuya on newer models