Linux

UPDATE (13:40 ET / 2024-07-05): Got the connection working via SMB. Literally the only thing I changed was moving to a credentials file rather than specifying credentials inline, so ... I'll be trying to figure out what mystery affliction prevented the connection before. Leaving this up because there are a bunch of great suggestions for troubleshooting this issue in the comments. Thanks everyone.

ORIGINAL POST:

Currently pulling out my hair. I have a Synology NAS with the tailscale service (everything up to date). I have a NixOS client laptop, everything up to date.

I'm simply (?) trying to connect to a share via tailscale, and I have not managed to find anything that works. I've been using NFS, but I'm fine with SMB ... or carrier pigeons at this point.

Does anyone know of a step by step, detailed, current tutorial to accomplish accessing a Synology share via tailscale on a linux device? I would not have thought this would be challenging!

Does anyone here use LXD/Incus? What do you do if you want to find the IP address of an instance, but incus list does not give you one? I am not sure what would be stopping one from being issued since that is how I have found that information before.

I am just a student trying to learn about them and do stuff. I often just find the IP of the container and then ssh in as that feels natural, but perhaps I am cutting against the grain here.

cross-posted from: https://lemmy.world/post/17218011

I was looking for a TUI modern podcast manager, with support for syncing with the gpodder API, therefore allowing synchronization with Android clients such as AntennaPod. shellcaster was unmaintained and relatively easy to extend (huge thanks to the original author), therefore I aimed at fixing known bugs and adding the features that seemed more important. There is a TODO in the repo, which should be done as soon as I get some feedback from the community.

As far I know I am the only one using hullcaster as a daily driver (for archlinux people, AUR package hullcaster-git). Still, it should work as is in most linux environments.

For people coming from shellcaster, unfortunately I had to make too many breaking changes, therefore it is better to just make a clean install.

Feel free to try it and submit the issues you find. This is my first project using rust therefore there is surely space for improvements in many places.

Which folders and files do I need to exclude from TimeShift?

Also is there a way to also exclude programs installed as .deb ?

I doing this to reduce Backup size as I have limited storage.

100GB - Windows 11
400GB - Storage
400GB - Mint
100GB - TimeShift

Where should I mount my internal drive partitions?

As far as I searched on the internet, I came to know that

/Media = mount point for removable media that system do it itself ( usb drive , CD )

/Mnt = temporarily mounting anything manually

I can most probably mount anything wherever I want, but if that's the case what's the point of /mnt? Just to be organised I suppose.

TLDR

If /mnt is for temporary and /media is for removable where should permanent non-removable devices/partitions be mounted. i.e. an internal HDD which is formatted as NTFS but needs to be automounted at startup?

Asking with the sole reason to know that, what's the practice of user who know Linux well, unlike me.

I know this is a silly question but I asked anyway.

This is a follow up thread as I saw some posts regarding games being used on Linux such as ports from Loki.

Was it a rarity to get say, DOOM on a Linux compatible disk? Surely the floppy disk version would've worked as normal no?

There was also DosEmu which seems like an ancestor to DOSBOX to play all your face dos games in a redhat or Slackware box.

I understand that getting things to work in order was a mess, but was it that difficult to find a Linux compatible game CD or floppy disk? Was there some form of piracy to acquire a converted windows copy on a BBS?

TLDR : I just wanna know if 90s linux gaming there for you guys since firms like Loki existed, hell there was a port of Quake on the funni penguin OS.

cross-posted from: https://lemmy.ml/post/17607748

Slowroll, which has a more modest update cadence than Tumbleweed, is gaining acceptance as a balance between the rapid updates of Tumbleweed’s rolling releases and the traditional Leap release.

Slowroll is nearly ready for full deployment and the development team has been working diligently to prepare the next version bump, with planned updates scheduled for July 9, August 9 and Sept. 9. These updates are expected to maintain a consistent monthly cadence to ensure users have timely and stable updates.

One of the critical updates pulled in will include the latest OpenSSH CVE fixes, which have already been made available in Tumbleweed. This fix enhances the security of Slowroll & ensure that it remains a robust and reliable distribution for users.

Highlighted Features of Slowroll

Balanced Update Cadence: Slowroll offers a monthly rolling update cycle that provides users with the latest features and security updates while ensuring stability through extensive testing and validation.

Beta Phase: Slowroll is now in the Beta phase, indicating its near readiness for full deployment. Users can expect a reliable experience with continuous improvements.

Continuous Improvement: The distribution integrates big updates approximately every month, alongside continuous bug fixes and security patches, ensuring a secure and up-to-date system.

Statistics and Status

According to the latest statistics available on the Slowroll Stats page:

Tumbleweed had 2813 updated packages since the last version bump

Slowroll received 1316 updates from 871 different packages and only 339 updated rpms are Slowroll-specific builds

Origins and Purpose

Slowroll, introduced in 2023, was designed as an experimental distribution. Its primary goal is to offer a slower rolling release compared to Tumbleweed, thus enhancing stability without compromising on access to new features. The distribution continuously evolves with big updates integrated approximately every month, supported by regular bug fixes and security updates.

It’s crucial to understand that Slowroll is not intended to replace Leap. Instead, it provides an alternative for users who desire more up-to-date software at a slower pace than Tumbleweed but faster than Leap.

If you try Slowroll, have a lot of fun - rolling… slowly!

I've run a small business for over 10 yeas. I use linux. I'm grateful to the community and I use FOSS where possible.

I have had some issues over the years, but have always been able to get around them (except CAD in 2013), but recently I've had issues with my government (UK). First they introduced 'making tax digital' and told me for years that I would have to buy windows only software (there was no legal option on linux until a few weeks before the deadline (https://www.comsci.co.uk/100PcVatFreeBridge saved the day). The UK Government didn't create a free solution or any route to that as they don't want the source to be open for making tax digital so accounting software companies have made a killing!

This week my internet banking stopped allowing payments, it no longer works in firefox (I'm guessing). On the telephone they asked me 'what search engine I was using'^+^ and advised to use google.

What is the best UK business bank to use if you use linux to run a small business? Do I have to use Chrom(e)ium? Does anyone else use linux for business admin? Is anyone (Freesoftware foundation, etc) thinking about the creeping legislative changes that make it literally illegal to use FOSS and linux?

I wanna be an ally, but its so tiring.

^+^ browser ≠ search engine. Yes, I'm pedantic, at least I didn't confuse them by saying 'quant' or 'duck duck go', OK!?

[SOLVED] Go to Gnome Settings > Multitasking > Disable Hot Corners

I'm on NixOS 24.05 and I'm using GNOME 46.2 (Wayland) and whenever I hover over the upper left corner of my screen all apps are showing as if I clicked the "Show Apps" button. Is there any way to turn it off? It's driving me insane. Since I'm working with multiple monitors, it's happening quite frequently. Thanks in advance.

I am running Linux on my macbook pro and it has a Broadcom BCM4360 wifi card. Problem is that the driver for it is proprietary (or more accurately, mostly proprietary with some of the source code available), quite outdated, and I couldn’t get it to work with Linux kernel v6.9.5.

I am running Gentoo Linux on my macbook with a custom kernel. I previously had wifi working, but then I reinstalled Gentoo (because I wanted to do full disk encryption), copied over the kernel config file from my previous install (which I knew had working wifi), migrated it to a newer kernel version (plus added support for full disk encryption) and now the wifi drivers won’t even compile.

So, I was thinking of replacing the current wifi card with something that has modern and open-source drivers for it. Is it possible to do that on a Macbook pro 11,2 (Retina, 15-inch, Late 2013)? If so, are there any compatible wifi cards with open source drivers for Linux?

Creating importer: Failed to invoke skopeo proxy method OpenImage: remote error: cryptographic signature verification failed: invalid signature when validating ASN.1 encoded signature ___

I was banging my head against my keyboard for an hour thinking that I broke my system until I saw this.

Hi folks,

I downloaded Aurora (https://getaurora.dev/) the other day with the intention of installing it on my 2013 MacBook Pro.

It wasn't until I got to the install screen when I realized that I have no networking.

I currently have Manjaro installed on this laptop, and I remember having to connect via Bluetooth to my phone to download and the Broadcom BCM4360 drivers.

Is there a good way to bake that into the image prior to installing?

Either that or I can try downloading the driver over Bluetooth again, but then I'll need to use a command to somehow layer it on top of the existing image? (rpm-ostree?)

Sorry if I'm missing some command or documentation, but it is a little more confusing trying out these immutable distros.

Has anyone else out there run into this issue and worked around it?

This is a quite complex process, and their documentation is incomplete and different 🥳

So here you go!

In the Fedora Forum we collect a lot of useful posts, that are not yet Documentation-ready (or not suited for Docs, as they are "too unofficial".

There are constantly new ones added.

@linux

Just made da switch from Windows 10 to Linux Mint. How do i get started?

I realize this is a Linux community, but I was wondering why you still hate Windows. I mean, I love Linux, but I will not argue that it's more convenient to the average person in most use cases to use Windows, I recently had to switch back to Windows and I realized how convenient it all was and how I was missing so many things because of my love for Linux. But at this point, Linux is a part of my personality and my self-image and I will not leave it, but I gotta be honest, it's pretty convenient being on Windows. So, why have you guys chosen to still stay on Linux? Some reasons I can appreciate include

1. The terrible privacy policies of Microsoft. It sometimes makes you feel like your computer is not owned by you but lent to you by Big Tech.
2. The community and the spirit of sharing
3. The joy of "figuring it out" and customizing everything you want to the minutest details
4. FREEDOM!!! sudo su Kinda ties into the previous points, but still one of the best selling points, the freedom to do whatever you want is liberating. You can run a server on it or you can create a script while knowing you have control over almost every FOSS app there is or just destroy your whole system with one command. Idk, feels good man!

These are the big ones, but one must realize you are sacrificing many things while not using windows too, productivity can be much greater there if you are a normie, it's really convenient! So yeah! Give me your reasons! Also, how many of you dual boot?

Hello guys,

I bought a new SSD (WD black sn770 2 TB) for my laptop and I also got a USB-C hub which includes a slot for an SSD. My old SSD is 512 GB

So here is what I want to do: I want to change to Linux from Windows 11. I want to keep my old SSD in the USB-C hub with Windows still installed in case I need it for some software/games but Linux will now be my main OS.

Are there any tips or recommendations on things I should look out for when doing this?

I also don't know if I can just install Linux in what is ATM the external SSD and then swap it out afterwards with the SSD inside the laptop without having to do anything extra and if it will just work like that.

I plan on following this tutorial: https://www.youtube.com/watch?v=bfWdnCIrcxk.

Also any recommendations on how I can safely transfer some files? Do I need a special software?

In case interested this is the distro that I plan on using: https://garudalinux.org

As a side note, I did check that the SSD is compatible with my computer and has everything right.

I found this netbook(?) somewhere in old things and just wonder: can linux be installed on it?

For those veteran linux people, what was it like back in 90s? I did see and hear of Unix systems being available for use but I did not see much apart from old versions of Debian in use.

Were they prominent in education like universities? Was it mainly a hobbyist thing at the time compared to the business needs of 98, 95 and classic mac?

I ask this because I found out that some PC games I owned were apparently also on Linux even in CD format from a firm named Loki.

when i boot my computer after having run an update, my primary monitor (which should be at 1920x1080) is stuck at 640x480. interestingly, when i reboot and change nothing, it fixes itself until i run another update.

i'm on arch, using nvidia 555.58-2, on plasma 6.1.1-1. the monitor in question is DP-0 in the system info below.

what could be causing this and how can i fix it?

i've been having this issue for a while while kinda just dealing with it because it was something i could easily work around by booting my computer twice, but i'd really like to get it solved.

system info:

System:
  Host: ***** Kernel: 6.9.7-arch1-1 arch: x86_64 bits: 64
  Desktop: KDE Plasma v: 6.1.1 Distro: Arch Linux
Graphics:
  Device-1: NVIDIA GP104 [GeForce GTX 1080] driver: nvidia v: 555.58
  Device-2: EMEET HD Webcam C960 driver: snd-usb-audio,uvcvideo type: USB
  Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.0 driver: X:
    loaded: N/A failed: nvidia gpu: nvidia resolution: 1: 1920x1080
    2: 1920x1080~60Hz 3: 1920x1080~60Hz
  API: EGL v: 1.5 drivers: kms_swrast,nvidia,swrast
    platforms: gbm,x11,surfaceless,device
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 555.58
    renderer: NVIDIA GeForce GTX 1080/PCIe/SSE2
  API: Vulkan v: 1.3.279 drivers: nvidia surfaces: xcb,xlib

Screen 0: minimum 8 x 8, current 4480 x 1080, maximum 32767 x 32767
DVI-D-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 509mm x 286mm
   1920x1080     60.00*+
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00  
   1152x864      75.00  
   1024x768      70.07    60.00  
   800x600       60.32    56.25  
   640x480       59.94  
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
   3840x2160     30.00 +  59.94    29.97    23.98  
   4096x2160     59.94    24.00  
   1920x1080     60.00*   59.94    29.97    23.98    60.00  
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x960      60.00  
   1280x800      74.93    59.81  
   1280x768      59.87  
   1280x720      60.00    59.94    29.97    23.98  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x480       59.94  
   640x480       59.94    59.93  
DP-0 connected 640x480+3840+0 (normal left inverted right x axis y axis) 0mm x 0mm
   640x480       59.94*+
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)

Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
DVI-D-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
   1920x1080     60.00*+
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x800      59.81  
   1280x720      60.00  
   1152x864      75.00  
   1024x768      70.07    60.00  
   800x600       60.32    56.25  
   640x480       59.94  
HDMI-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 1600mm x 900mm
   3840x2160     30.00 +  59.94    29.97    23.98  
   4096x2160     59.94    24.00  
   1920x1080     60.00*   59.94    29.97    23.98    60.00  
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     60.02  
   1280x960      60.00  
   1280x800      74.93    59.81  
   1280x768      59.87  
   1280x720      60.00    59.94    29.97    23.98  
   1024x768      60.00  
   800x600       60.32    56.25  
   720x480       59.94  
   640x480       59.94    59.93  
DP-0 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080     60.00 + 144.00*  119.98    99.93    59.94    50.00  
   1680x1050     59.88  
   1440x900      59.90  
   1280x1024     75.02    60.02  
   1280x720      60.00    59.94    50.00  
   1024x768     119.99    99.97    75.03    70.07    60.00  
   800x600      119.97    99.66    75.00    72.19    60.32    56.25  
   720x576       50.00  
   720x480       59.94  
   640x480      119.52    99.77    75.00    72.81    59.94    59.93  
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)