this post was submitted on 16 Jul 2024
10 points (100.0% liked)

Ask Electronics

3315 readers
1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.


founded 1 year ago
MODERATORS
 

I have a foldable 120w one with 4 panels in sewn cloth. Gust blew it and the little plastic anti-tug box broke so wires could move.

Still worked, but one day the watts were halved.

Examined wires closely, not easy because most of that little protective box still in place, but it looked like they twisted around each other in there, so I untwisted and glued anti-tug fitting to case so it can't turn again.

Today broke two mounts of the little box so I can see wires clearly, two stranded leads with what looks like a can cap in between and the remains of a foam strip that looks like it went in between.

Still puts out half wattage at about 24v, but I'm wondering if wires under the fabric case are disconnected. It used to put out more than the rated 120w, I've seen 138w on the battery boxes meter.

My thinking is either open the case seam to see in, or assume a panel or two shorted and are lost anyway, leave alone and be happy it works at all.

One thing I don't know what happens when solar panels short, if that's what happened. I do have a DVM and could check resistance, but without disassembly it would be cumulative.

Or the twisting could have disconnected one or more panels, they're supposedly wired in series and its putting out like it would on an overcast day. In which case I might be able to reconnect them.

Bluetti is nice enough superficially but I'm sure I'm unlikely to get tech info out of them. They're very Apple-like is dealing with consumers.

(BTW, they will sell your email address to multiple marketers promoting "sales" of bluetti products after a purchase. Not a lot, but the sender addresses are always different.)

top 2 comments
sorted by: hot top controversial new old
[โ€“] clif@lemmy.world 3 points 3 months ago (1 children)

I have no useful info to add but posting to follow since I've got one of their 220s that's kind of flaky and have been debating poking around inside.

Full sun in the fall and it was waffling between 0w and ~18w while feeding an AC200P. But the next day with almost exact conditions and location it was getting around 180w for awhile at least.

Then life got busy and 9 months later I haven't retested. It was "free" with a promotion though.

[โ€“] aaaaace@lemmy.blahaj.zone 2 points 3 months ago

Mine, when fully working, was sensitive to a few leaves in the way. It was a good panel, but I don't want to deal with Bluetti again.